Cracked, oil-stained bare concrete garage slab before coating
The same garage finished with a glossy green and gold metallic epoxy floor by Resinate
Serving the GTA since 2014

Floors built to outlast the bid.

We diamond-grind every slab, install industrial-grade resin systems, and back it in writing. No peeling, no yellowing, no hardware-store shortcuts; just a floor that outlasts the cheap bid.

4.9/5 from 214 Google reviews
Scroll
Why Resinate

Quality lives in the prep you never see

Anyone can pour resin. The difference between a floor that lasts fifteen years and one that peels in two is everything that happens before the finish coat.

We grind, not just clean

Every slab is diamond-ground to a proper concrete profile so the resin mechanically bonds. Cut-rate installers roll product over swept concrete; that is why it peels.

We moisture-test first

Hydrostatic pressure destroys coatings from underneath. We test slab moisture and mitigate it before a drop of resin goes down.

We build to spec mil thickness

A real floor is a multi-coat, high-solids build many times thicker than a DIY kit; measured, not guessed, to match your traffic.

Diamond-grinding concrete floor preparation before epoxy coating
15-year Workmanship & adhesion warranty, in writing
The honest comparison

Epoxy vs. paint vs. tile

Hardware store

Floor Paint

  • Lifespan 1–3 years
  • Hot tires Peels & lifts
  • Surface Seamless but thin
  • Chemicals & salt Absorbs & stains
  • Prep Often none
  • Finishes Solid colour only
The alternative

Tile

  • Lifespan 10–15 years
  • Hot tires Cracks under load
  • Surface Grout traps dirt
  • Chemicals & salt Grout absorbs
  • Prep Mortar bed required
  • Finishes Limited patterns
By the numbers

The record so far

5+ yrs

In business

100+

Floors completed

4.9/5

214 Google reviews

Licensed

Insured & certified

Our Process

Why our floors outlast the cheap bid

A resin floor is only as good as the concrete under it. Our four-step process is built around prep; the part that determines whether a floor lasts one winter or twenty.

Our process · Assessment

On-site assessment

We inspect and moisture-test your slab, discuss finishes, and give you a firm, itemized quote; no surprises on install day.

Step 01 of 04 Get a Free Quote
Bare concrete garage slab being assessed before a resin floor
Our process · Prep

Diamond-grind prep

We mechanically grind the concrete to an open profile and repair every crack and spall. This is the step cut-rate installers skip.

Step 02 of 04 Get a Free Quote
Diamond grinder opening the concrete profile during floor prep
Our process · Install

Resin system install

Basecoat, decorative media, and a UV-stable polyaspartic topcoat are installed to spec at full mil thickness.

Step 03 of 04 Get a Free Quote
Decorative flake broadcast into a resin basecoat
Our process · Handover

Cure & walkthrough

Most floors are walk-ready the same evening. We walk the finished job with you and hand over your written warranty.

Step 04 of 04 Get a Free Quote
Finished flake garage floor at handover
Reviews

Rated 4.9 by GTA homeowners and businesses

We would rather earn a reputation than buy one. Here is what our neighbours say.

4.9

214 verified reviews

Service Area

Installing across the Greater Toronto Area

From Brampton and Mississauga to Toronto, North York, Vaughan, and Markham; if you are in the GTA, we can quote your floor. Find your city below.

FAQ

Answers before you commit

The questions GTA homeowners and businesses ask us most.

  • Most residential garage floors fall between $4 and $9 per square foot depending on the system, slab condition, and finish. Metallic and heavy industrial floors cost more. Because prep is where quality lives, we quote after seeing the slab; no lowball number that balloons on install day.

  • A typical single or double garage is a one-day install with our fast-cure polyaspartic topcoat. You can usually walk on it the same evening and park on it within 24–48 hours. Larger commercial jobs are scheduled in phases to limit downtime.

  • DIY kits are thin water-based coatings rolled onto unprepared concrete, which is why they peel and lift under hot tires within a year or two. We diamond-grind the slab to a proper profile and install a high-solids system many times thicker; the difference between a floor and a paint job.

  • Yes. We offer flexible financing on larger residential and commercial projects so you can get the floor done right now and spread the cost. Ask about current terms when you request your quote.

  • Every Resinate residential floor is backed by a 15-year workmanship and adhesion warranty. Commercial systems carry a warranty matched to the specified build. If it peels or delaminates from a workmanship defect, we make it right.

  • Usually, yes; that is exactly what proper prep is for. We chase and fill cracks, repair spalled areas, and moisture-test before coating. Severely damaged slabs may need resurfacing first, which we also do in-house.

Call Now Free Quote